Spherical roller bearings
222/710CAF3/W33 Spherical Roller Bearing Dimensions & Specifications
222/710CAF3/W33 spherical roller bearing: 710 mm bore (d), 1280 mm outside diameter (D), 325 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 710 mm |
|---|---|
| Outside diameter D | 1280 mm |
| Width B | 325 mm |
| Mass | 1900 kg |
| Catalogue dynamic load Cr | 13700 kN |
| Catalogue static load Cor | 24500 kN |
| Grease-lubricated speed grease | 170 rpm |
| Oil-lubricated speed oil | 220 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 1226 mm |
|---|---|
| Abutment dimension da da | 764 mm |
| Minimum chamfer r12 r12 | 12 mm |
| Factor Y0 Y0 | 2.4 |
| Factor Y1 Y1 | 2.5 |
| Factor Y2 Y2 | 3.7 |
| Factor e e | 0.27 |
| Maximum fillet ra ra | 10 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 222/710CAF3/W33?
The 222/710CAF3/W33 catalogue lists da = 764 mm; Da = 1226 mm; ra ≤ 10 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 222/710CAF3/W33?
The listed values for 222/710CAF3/W33 are grease: 170 rpm; oil: 220 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 222/710CAF3/W33?
The catalogue reference mass for 222/710CAF3/W33 is 1900 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.