Spherical roller bearings
22244CA/W33 Spherical Roller Bearing Dimensions & Specifications
22244CA/W33 spherical roller bearing: 220 mm bore (d), 400 mm outside diameter (D), 108 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 220 mm |
|---|---|
| Outside diameter D | 400 mm |
| Width B | 108 mm |
| Mass | 59 kg |
| Catalogue dynamic load Cr | 1570 kN |
| Catalogue static load Cor | 2430 kN |
| Grease-lubricated speed grease | 850 rpm |
| Oil-lubricated speed oil | 1000 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 382 mm |
|---|---|
| Abutment dimension da da | 238 mm |
| Minimum chamfer r12 r12 | 4 mm |
| Factor Y0 Y0 | 2.4 |
| Factor Y1 Y1 | 2.5 |
| Factor Y2 Y2 | 3.7 |
| Factor e e | 0.27 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 22244CA/W33?
The 22244CA/W33 catalogue lists da = 238 mm; Da = 382 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 22244CA/W33?
The listed values for 22244CA/W33 are grease: 850 rpm; oil: 1000 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 22244CA/W33?
The catalogue reference mass for 22244CA/W33 is 59 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.