Spherical roller bearings
230/710CAF3/W33 Spherical Roller Bearing Dimensions & Specifications
230/710CAF3/W33 spherical roller bearing: 710 mm bore (d), 1030 mm outside diameter (D), 236 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 710 mm |
|---|---|
| Outside diameter D | 1030 mm |
| Width B | 236 mm |
| Mass | 647 kg |
| Catalogue dynamic load Cr | 7100 kN |
| Catalogue static load Cor | 15800 kN |
| Grease-lubricated speed grease | 240 rpm |
| Oil-lubricated speed oil | 280 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 994 mm |
|---|---|
| Abutment dimension da da | 746 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Factor Y0 Y0 | 3 |
| Factor Y1 Y1 | 3.1 |
| Factor Y2 Y2 | 4.6 |
| Factor e e | 0.22 |
| Maximum fillet ra ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 230/710CAF3/W33?
The 230/710CAF3/W33 catalogue lists da = 746 mm; Da = 994 mm; ra ≤ 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 230/710CAF3/W33?
The listed values for 230/710CAF3/W33 are grease: 240 rpm; oil: 280 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 230/710CAF3/W33?
The catalogue reference mass for 230/710CAF3/W33 is 647 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.