Spherical roller bearings
23026CA/W33 Spherical Roller Bearing Dimensions & Specifications
23026CA/W33 spherical roller bearing: 130 mm bore (d), 200 mm outside diameter (D), 52 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 130 mm |
|---|---|
| Outside diameter D | 200 mm |
| Width B | 52 mm |
| Mass | 5.98 kg |
| Catalogue dynamic load Cr | 400 kN |
| Catalogue static load Cor | 655 kN |
| Grease-lubricated speed grease | 1700 rpm |
| Oil-lubricated speed oil | 2000 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 190 mm |
|---|---|
| Abutment dimension da da | 140 mm |
| Minimum chamfer r12 r12 | 2 mm |
| Factor Y0 Y0 | 2.8 |
| Factor Y1 Y1 | 2.9 |
| Factor Y2 Y2 | 4.3 |
| Factor e e | 0.23 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23026CA/W33?
The 23026CA/W33 catalogue lists da = 140 mm; Da = 190 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23026CA/W33?
The listed values for 23026CA/W33 are grease: 1700 rpm; oil: 2000 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23026CA/W33?
The catalogue reference mass for 23026CA/W33 is 5.98 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.