Spherical roller bearings
23034CA/W33 Spherical Roller Bearing Dimensions & Specifications
23034CA/W33 spherical roller bearing: 170 mm bore (d), 260 mm outside diameter (D), 67 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 170 mm |
|---|---|
| Outside diameter D | 260 mm |
| Width B | 67 mm |
| Mass | 13 kg |
| Catalogue dynamic load Cr | 640 kN |
| Catalogue static load Cor | 1090 kN |
| Grease-lubricated speed grease | 1200 rpm |
| Oil-lubricated speed oil | 1600 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 248 mm |
|---|---|
| Abutment dimension da da | 182 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Factor Y0 Y0 | 2.8 |
| Factor Y1 Y1 | 2.9 |
| Factor Y2 Y2 | 4.3 |
| Factor e e | 0.23 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23034CA/W33?
The 23034CA/W33 catalogue lists da = 182 mm; Da = 248 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23034CA/W33?
The listed values for 23034CA/W33 are grease: 1200 rpm; oil: 1600 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23034CA/W33?
The catalogue reference mass for 23034CA/W33 is 13 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.