Spherical roller bearings
23092CAF3/W33 Spherical Roller Bearing Dimensions & Specifications
23092CAF3/W33 spherical roller bearing: 460 mm bore (d), 680 mm outside diameter (D), 163 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 460 mm |
|---|---|
| Outside diameter D | 680 mm |
| Width B | 163 mm |
| Mass | 201 kg |
| Catalogue dynamic load Cr | 3450 kN |
| Catalogue static load Cor | 7100 kN |
| Grease-lubricated speed grease | 400 rpm |
| Oil-lubricated speed oil | 500 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 652 mm |
|---|---|
| Abutment dimension da da | 488 mm |
| Minimum chamfer r12 r12 | 6 mm |
| Factor Y0 Y0 | 3 |
| Factor Y1 Y1 | 3.1 |
| Factor Y2 Y2 | 4.6 |
| Factor e e | 0.22 |
| Maximum fillet ra ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23092CAF3/W33?
The 23092CAF3/W33 catalogue lists da = 488 mm; Da = 652 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23092CAF3/W33?
The listed values for 23092CAF3/W33 are grease: 400 rpm; oil: 500 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23092CAF3/W33?
The catalogue reference mass for 23092CAF3/W33 is 201 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.