Spherical roller bearings
23130CA/W33 Spherical Roller Bearing Dimensions & Specifications
23130CA/W33 spherical roller bearing: 150 mm bore (d), 250 mm outside diameter (D), 80 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 150 mm |
|---|---|
| Outside diameter D | 250 mm |
| Width B | 80 mm |
| Mass | 15.8 kg |
| Catalogue dynamic load Cr | 725 kN |
| Catalogue static load Cor | 1180 kN |
| Grease-lubricated speed grease | 1100 rpm |
| Oil-lubricated speed oil | 1400 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 238 mm |
|---|---|
| Abutment dimension da da | 162 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Factor Y0 Y0 | 2.2 |
| Factor Y1 Y1 | 2.3 |
| Factor Y2 Y2 | 3.4 |
| Factor e e | 0.3 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23130CA/W33?
The 23130CA/W33 catalogue lists da = 162 mm; Da = 238 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23130CA/W33?
The listed values for 23130CA/W33 are grease: 1100 rpm; oil: 1400 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23130CA/W33?
The catalogue reference mass for 23130CA/W33 is 15.8 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.