Spherical roller bearings
232/530CAF3/W33 Spherical Roller Bearing Dimensions & Specifications
232/530CAF3/W33 spherical roller bearing: 530 mm bore (d), 980 mm outside diameter (D), 355 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 530 mm |
|---|---|
| Outside diameter D | 980 mm |
| Width B | 355 mm |
| Mass | 1170 kg |
| Catalogue dynamic load Cr | 10100 kN |
| Catalogue static load Cor | 18800 kN |
| Grease-lubricated speed grease | 240 rpm |
| Oil-lubricated speed oil | 300 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 936 mm |
|---|---|
| Abutment dimension da da | 574 mm |
| Minimum chamfer r12 r12 | 9.5 mm |
| Factor Y0 Y0 | 1.7 |
| Factor Y1 Y1 | 1.8 |
| Factor Y2 Y2 | 2.7 |
| Factor e e | 0.38 |
| Maximum fillet ra ra | 8 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 232/530CAF3/W33?
The 232/530CAF3/W33 catalogue lists da = 574 mm; Da = 936 mm; ra ≤ 8 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 232/530CAF3/W33?
The listed values for 232/530CAF3/W33 are grease: 240 rpm; oil: 300 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 232/530CAF3/W33?
The catalogue reference mass for 232/530CAF3/W33 is 1170 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.