Spherical roller bearings
23236CA/W33 Spherical Roller Bearing Dimensions & Specifications
23236CA/W33 spherical roller bearing: 180 mm bore (d), 320 mm outside diameter (D), 112 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 180 mm |
|---|---|
| Outside diameter D | 320 mm |
| Width B | 112 mm |
| Mass | 38.9 kg |
| Catalogue dynamic load Cr | 1300 kN |
| Catalogue static load Cor | 2110 kN |
| Grease-lubricated speed grease | 850 rpm |
| Oil-lubricated speed oil | 1100 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 302 mm |
|---|---|
| Abutment dimension da da | 198 mm |
| Minimum chamfer r12 r12 | 4 mm |
| Factor Y0 Y0 | 2 |
| Factor Y1 Y1 | 2 |
| Factor Y2 Y2 | 3 |
| Factor e e | 0.33 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23236CA/W33?
The 23236CA/W33 catalogue lists da = 198 mm; Da = 302 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23236CA/W33?
The listed values for 23236CA/W33 are grease: 850 rpm; oil: 1100 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23236CA/W33?
The catalogue reference mass for 23236CA/W33 is 38.9 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.