Spherical roller bearings
238/630CAF3/W33 Spherical Roller Bearing Dimensions & Specifications
238/630CAF3/W33 spherical roller bearing: 630 mm bore (d), 780 mm outside diameter (D), 112 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 630 mm |
|---|---|
| Outside diameter D | 780 mm |
| Width B | 112 mm |
| Mass | 120 kg |
| Catalogue dynamic load Cr | 2080 kN |
| Catalogue static load Cor | 5795 kN |
| Grease-lubricated speed grease | 320 rpm |
| Oil-lubricated speed oil | 400 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 762 mm |
|---|---|
| Abutment dimension da da | 648 mm |
| Minimum chamfer r12 r12 | 4 mm |
| Factor Y0 Y0 | 5.6 |
| Factor Y1 Y1 | 5.6 |
| Factor Y2 Y2 | 8.4 |
| Factor e e | 0.12 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 238/630CAF3/W33?
The 238/630CAF3/W33 catalogue lists da = 648 mm; Da = 762 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 238/630CAF3/W33?
The listed values for 238/630CAF3/W33 are grease: 320 rpm; oil: 400 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 238/630CAF3/W33?
The catalogue reference mass for 238/630CAF3/W33 is 120 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.