Spherical roller bearings
23860CA/W33 Spherical Roller Bearing Dimensions & Specifications
23860CA/W33 spherical roller bearing: 300 mm bore (d), 380 mm outside diameter (D), 60 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 300 mm |
|---|---|
| Outside diameter D | 380 mm |
| Width B | 60 mm |
| Mass | 17 kg |
| Catalogue dynamic load Cr | 612 kN |
| Catalogue static load Cor | 1482 kN |
| Grease-lubricated speed grease | 700 rpm |
| Oil-lubricated speed oil | 900 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 368 mm |
|---|---|
| Abutment dimension da da | 312 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Factor Y0 Y0 | 5 |
| Factor Y1 Y1 | 5.2 |
| Factor Y2 Y2 | 7.7 |
| Factor e e | 0.13 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23860CA/W33?
The 23860CA/W33 catalogue lists da = 312 mm; Da = 368 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23860CA/W33?
The listed values for 23860CA/W33 are grease: 700 rpm; oil: 900 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23860CA/W33?
The catalogue reference mass for 23860CA/W33 is 17 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.