Spherical roller bearings
23930CA/W33 Spherical Roller Bearing Dimensions & Specifications
23930CA/W33 spherical roller bearing: 150 mm bore (d), 210 mm outside diameter (D), 45 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 150 mm |
|---|---|
| Outside diameter D | 210 mm |
| Width B | 45 mm |
| Mass | 4.97 kg |
| Catalogue dynamic load Cr | 334 kN |
| Catalogue static load Cor | 622 kN |
| Grease-lubricated speed grease | 1500 rpm |
| Oil-lubricated speed oil | 1700 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 200 mm |
|---|---|
| Abutment dimension da da | 160 mm |
| Minimum chamfer r12 r12 | 2 mm |
| Factor Y0 Y0 | 3.36 |
| Factor Y1 Y1 | 3.44 |
| Factor Y2 Y2 | 5.12 |
| Factor e e | 0.2 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23930CA/W33?
The 23930CA/W33 catalogue lists da = 160 mm; Da = 200 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23930CA/W33?
The listed values for 23930CA/W33 are grease: 1500 rpm; oil: 1700 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23930CA/W33?
The catalogue reference mass for 23930CA/W33 is 4.97 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.