Spherical roller bearings
23948CA/W33 Spherical Roller Bearing Dimensions & Specifications
23948CA/W33 spherical roller bearing: 240 mm bore (d), 320 mm outside diameter (D), 60 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 240 mm |
|---|---|
| Outside diameter D | 320 mm |
| Width B | 60 mm |
| Mass | 13.3 kg |
| Catalogue dynamic load Cr | 635 kN |
| Catalogue static load Cor | 1300 kN |
| Grease-lubricated speed grease | 950 rpm |
| Oil-lubricated speed oil | 1200 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 308 mm |
|---|---|
| Abutment dimension da da | 252 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Factor Y0 Y0 | 3.9 |
| Factor Y1 Y1 | 4 |
| Factor Y2 Y2 | 6 |
| Factor e e | 0.17 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23948CA/W33?
The 23948CA/W33 catalogue lists da = 252 mm; Da = 308 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23948CA/W33?
The listed values for 23948CA/W33 are grease: 950 rpm; oil: 1200 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23948CA/W33?
The catalogue reference mass for 23948CA/W33 is 13.3 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.