Spherical roller bearings
23972CA/W33 Spherical Roller Bearing Dimensions & Specifications
23972CA/W33 spherical roller bearing: 360 mm bore (d), 480 mm outside diameter (D), 90 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 360 mm |
|---|---|
| Outside diameter D | 480 mm |
| Width B | 90 mm |
| Mass | 44.7 kg |
| Catalogue dynamic load Cr | 1390 kN |
| Catalogue static load Cor | 3050 kN |
| Grease-lubricated speed grease | 600 rpm |
| Oil-lubricated speed oil | 750 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 466 mm |
|---|---|
| Abutment dimension da da | 374 mm |
| Minimum chamfer r12 r12 | 3 mm |
| Factor Y0 Y0 | 4 |
| Factor Y1 Y1 | 4.1 |
| Factor Y2 Y2 | 6 |
| Factor e e | 0.17 |
| Maximum fillet ra ra | 2.5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23972CA/W33?
The 23972CA/W33 catalogue lists da = 374 mm; Da = 466 mm; ra ≤ 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23972CA/W33?
The listed values for 23972CA/W33 are grease: 600 rpm; oil: 750 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23972CA/W33?
The catalogue reference mass for 23972CA/W33 is 44.7 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.