Spherical roller bearings
24232CA/W33 Spherical Roller Bearing Dimensions & Specifications
24232CA/W33 spherical roller bearing: 160 mm bore (d), 290 mm outside diameter (D), 128 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 160 mm |
|---|---|
| Outside diameter D | 290 mm |
| Width B | 128 mm |
| Mass | 36 kg |
| Catalogue dynamic load Cr | 1120 kN |
| Catalogue static load Cor | 1800 kN |
| Grease-lubricated speed grease | 950 rpm |
| Oil-lubricated speed oil | 1300 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 276 mm |
|---|---|
| Abutment dimension da da | 174 mm |
| Minimum chamfer r12 r12 | 3 mm |
| Factor Y0 Y0 | 1.4 |
| Factor Y1 Y1 | 1.4 |
| Factor Y2 Y2 | 2.1 |
| Factor e e | 0.47 |
| Maximum fillet ra ra | 2.5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 24232CA/W33?
The 24232CA/W33 catalogue lists da = 174 mm; Da = 276 mm; ra ≤ 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 24232CA/W33?
The listed values for 24232CA/W33 are grease: 950 rpm; oil: 1300 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 24232CA/W33?
The catalogue reference mass for 24232CA/W33 is 36 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.