Spherical roller bearings
24284CA/W33 Spherical Roller Bearing Dimensions & Specifications
24284CA/W33 spherical roller bearing: 420 mm bore (d), 760 mm outside diameter (D), 335 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 420 mm |
|---|---|
| Outside diameter D | 760 mm |
| Width B | 335 mm |
| Mass | 702 kg |
| Catalogue dynamic load Cr | 8150 kN |
| Catalogue static load Cor | 16000 kN |
| Grease-lubricated speed grease | 300 rpm |
| Oil-lubricated speed oil | 400 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 724 mm |
|---|---|
| Abutment dimension da da | 456 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Factor Y0 Y0 | 1.5 |
| Factor Y1 Y1 | 1.5 |
| Factor Y2 Y2 | 2.2 |
| Factor e e | 0.45 |
| Maximum fillet ra ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 24284CA/W33?
The 24284CA/W33 catalogue lists da = 456 mm; Da = 724 mm; ra ≤ 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 24284CA/W33?
The listed values for 24284CA/W33 are grease: 300 rpm; oil: 400 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 24284CA/W33?
The catalogue reference mass for 24284CA/W33 is 702 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.