Spherical roller bearings
249/950CAF3/W33 Spherical Roller Bearing Dimensions & Specifications
249/950CAF3/W33 spherical roller bearing: 950 mm bore (d), 1250 mm outside diameter (D), 300 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 950 mm |
|---|---|
| Outside diameter D | 1250 mm |
| Width B | 300 mm |
| Mass | 1000 kg |
| Catalogue dynamic load Cr | 8740 kN |
| Catalogue static load Cor | 24700 kN |
| Grease-lubricated speed grease | 140 rpm |
| Oil-lubricated speed oil | 180 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 1214 mm |
|---|---|
| Abutment dimension da da | 986 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Factor Y0 Y0 | 3.2 |
| Factor Y1 Y1 | 3.2 |
| Factor Y2 Y2 | 4.8 |
| Factor e e | 0.21 |
| Maximum fillet ra ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 249/950CAF3/W33?
The 249/950CAF3/W33 catalogue lists da = 986 mm; Da = 1214 mm; ra ≤ 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 249/950CAF3/W33?
The listed values for 249/950CAF3/W33 are grease: 140 rpm; oil: 180 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 249/950CAF3/W33?
The catalogue reference mass for 249/950CAF3/W33 is 1000 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.