Metric single-row tapered roller bearings
30230 Tapered Roller Bearing Dimensions & Specifications
30230 tapered roller bearing: 150 mm bore (d), 270 mm outside diameter (D), 49 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 150 mm |
|---|---|
| Outside diameter D | 270 mm |
| Overall width T | 49 mm |
| Inner-ring width B | 45 mm |
| Outer-ring width C | 38 mm |
| Mass | 10.7 kg |
| Catalogue dynamic load Cr | 435 kN |
| Catalogue static load Cor | 570 kN |
Mounting dimensions & additional parameters (12)
| Abutment dimension Da Da | 246 mm |
|---|---|
| Abutment dimension Db Db | 259 mm |
| Abutment dimension da da | 180 mm |
| Abutment dimension db db | 165 mm |
| Minimum chamfer r12 r12 | 4 mm |
| Minimum chamfer r34 r34 | 3 mm |
| Factor Y Y | 1.4 |
| Factor Y0 Y0 | 0.77 |
| Factor e e | 0.43 |
| Maximum fillet ra ra | 3 mm |
| Maximum fillet rb rb | 2.5 mm |
| Load centre dimension a a | 50.2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which width should I use when checking 30230?
For 30230, the complete bearing width T is 49 mm; the inner-ring width B is 45 mm. The outer-ring width C is 38 mm. Check T against the assembly drawing; the separate ring widths describe different parts.
Which mounting dimensions are listed for 30230?
The 30230 catalogue lists da = 180 mm; Da = 246 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of 30230?
The catalogue reference mass for 30230 is 10.7 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.