Metric single-row tapered roller bearings
32060X Tapered Roller Bearing Dimensions & Specifications
32060X tapered roller bearing: 300 mm bore (d), 460 mm outside diameter (D), 100 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 300 mm |
|---|---|
| Outside diameter D | 460 mm |
| Overall width T | 100 mm |
| Inner-ring width B | 100 mm |
| Outer-ring width C | 74 mm |
| Mass | 56.6 kg |
| Catalogue dynamic load Cr | 1440 kN |
| Catalogue static load Cor | 2700 kN |
Mounting dimensions & additional parameters (12)
| Abutment dimension Da Da | 423 mm |
|---|---|
| Abutment dimension Db Db | 447 mm |
| Abutment dimension da da | 344 mm |
| Abutment dimension db db | 317 mm |
| Minimum chamfer r12 r12 | 5 mm |
| Minimum chamfer r34 r34 | 4 mm |
| Factor Y Y | 1.4 |
| Factor Y0 Y0 | 0.76 |
| Factor e e | 0.43 |
| Maximum fillet ra ra | 4 mm |
| Maximum fillet rb rb | 3 mm |
| Load centre dimension a a | 98.4 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which width should I use when checking 32060X?
For 32060X, the complete bearing width T is 100 mm; the inner-ring width B is 100 mm. The outer-ring width C is 74 mm. Check T against the assembly drawing; the separate ring widths describe different parts.
Which mounting dimensions are listed for 32060X?
The 32060X catalogue lists da = 344 mm; Da = 423 mm; ra ≤ 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of 32060X?
The catalogue reference mass for 32060X is 56.6 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.