Metric single-row tapered roller bearings
32926 Tapered Roller Bearing Dimensions & Specifications
32926 tapered roller bearing: 130 mm bore (d), 180 mm outside diameter (D), 32 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 130 mm |
|---|---|
| Outside diameter D | 180 mm |
| Overall width T | 32 mm |
| Inner-ring width B | 32 mm |
| Outer-ring width C | 25 mm |
| Mass | 2.4 kg |
| Catalogue dynamic load Cr | 198 kN |
| Catalogue static load Cor | 365 kN |
Mounting dimensions & additional parameters (12)
| Abutment dimension Da Da | 167 mm |
|---|---|
| Abutment dimension Db Db | 173 mm |
| Abutment dimension da da | 139 mm |
| Abutment dimension db db | 141 mm |
| Minimum chamfer r12 r12 | 2 mm |
| Minimum chamfer r34 r34 | 1.5 mm |
| Factor Y Y | 1.8 |
| Factor Y0 Y0 | 1 |
| Factor e e | 0.33 |
| Maximum fillet ra ra | 1.5 mm |
| Maximum fillet rb rb | 1.5 mm |
| Load centre dimension a a | 31 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which width should I use when checking 32926?
For 32926, the complete bearing width T is 32 mm; the inner-ring width B is 32 mm. The outer-ring width C is 25 mm. Check T against the assembly drawing; the separate ring widths describe different parts.
Which mounting dimensions are listed for 32926?
The 32926 catalogue lists da = 139 mm; Da = 167 mm; ra ≤ 1.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of 32926?
The catalogue reference mass for 32926 is 2.4 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.