Metric single-row tapered roller bearings
33026 Tapered Roller Bearing Dimensions & Specifications
33026 tapered roller bearing: 130 mm bore (d), 200 mm outside diameter (D), 55 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 130 mm |
|---|---|
| Outside diameter D | 200 mm |
| Overall width T | 55 mm |
| Inner-ring width B | 55 mm |
| Outer-ring width C | 43 mm |
| Mass | 6.19 kg |
| Catalogue dynamic load Cr | 390 kN |
| Catalogue static load Cor | 705 kN |
Mounting dimensions & additional parameters (12)
| Abutment dimension Da Da | 178 mm |
|---|---|
| Abutment dimension Db Db | 192 mm |
| Abutment dimension da da | 142 mm |
| Abutment dimension db db | 143 mm |
| Minimum chamfer r12 r12 | 2.5 mm |
| Minimum chamfer r34 r34 | 2 mm |
| Factor Y Y | 1.76 |
| Factor Y0 Y0 | 0.97 |
| Factor e e | 0.34 |
| Maximum fillet ra ra | 2 mm |
| Maximum fillet rb rb | 2 mm |
| Load centre dimension a a | 42.5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which width should I use when checking 33026?
For 33026, the complete bearing width T is 55 mm; the inner-ring width B is 55 mm. The outer-ring width C is 43 mm. Check T against the assembly drawing; the separate ring widths describe different parts.
Which mounting dimensions are listed for 33026?
The 33026 catalogue lists da = 142 mm; Da = 178 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of 33026?
The catalogue reference mass for 33026 is 6.19 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.