Deep groove ball bearings
61932MA Deep Groove Ball Bearing Dimensions & Specifications
61932MA deep groove ball bearing: 160 mm bore (d), 220 mm outside diameter (D), 28 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 160 mm |
|---|---|
| Outside diameter D | 220 mm |
| Width B | 28 mm |
| Mass | 3.25 kg |
| Catalogue dynamic load Cr | 87 kN |
| Catalogue static load Cor | 96 kN |
| Grease-lubricated speed grease | 2600 rpm |
| Oil-lubricated speed oil | 3200 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 211 mm |
|---|---|
| Abutment dimension da da | 169 mm |
| Minimum chamfer r12 r12 | 2.0 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 61932MA?
The 61932MA catalogue lists da = 169 mm; Da = 211 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 61932MA?
The listed values for 61932MA are grease: 2600 rpm; oil: 3200 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 61932MA?
The catalogue reference mass for 61932MA is 3.25 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.