Deep groove ball bearings
61952M Deep Groove Ball Bearing Dimensions & Specifications
61952M deep groove ball bearing: 260 mm bore (d), 360 mm outside diameter (D), 46 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 260 mm |
|---|---|
| Outside diameter D | 360 mm |
| Width B | 46 mm |
| Mass | 14.5 kg |
| Catalogue dynamic load Cr | 204 kN |
| Catalogue static load Cor | 255 kN |
| Grease-lubricated speed grease | 1600 rpm |
| Oil-lubricated speed oil | 1900 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 342 mm |
|---|---|
| Abutment dimension da da | 282 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 61952M?
The 61952M catalogue lists da = 282 mm; Da = 342 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 61952M?
The listed values for 61952M are grease: 1600 rpm; oil: 1900 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 61952M?
The catalogue reference mass for 61952M is 14.5 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.