Deep groove ball bearings
61984 Deep Groove Ball Bearing Dimensions & Specifications
61984 deep groove ball bearing: 420 mm bore (d), 560 mm outside diameter (D), 65 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 420 mm |
|---|---|
| Outside diameter D | 560 mm |
| Width B | 65 mm |
| Mass | 43.0 kg |
| Catalogue dynamic load Cr | 340 kN |
| Catalogue static load Cor | 570 kN |
| Grease-lubricated speed grease | 900 rpm |
| Oil-lubricated speed oil | 1100 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 533 mm |
|---|---|
| Abutment dimension da da | 454 mm |
| Minimum chamfer r12 r12 | 4.0 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 61984?
The 61984 catalogue lists da = 454 mm; Da = 533 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 61984?
The listed values for 61984 are grease: 900 rpm; oil: 1100 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 61984?
The catalogue reference mass for 61984 is 43.0 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.