Deep groove ball bearings
6264 Deep Groove Ball Bearing Dimensions & Specifications
6264 deep groove ball bearing: 320 mm bore (d), 580 mm outside diameter (D), 92 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 320 mm |
|---|---|
| Outside diameter D | 580 mm |
| Width B | 92 mm |
| Mass | 110 kg |
| Catalogue dynamic load Cr | 530 kN |
| Catalogue static load Cor | 805 kN |
| Grease-lubricated speed grease | 950 rpm |
| Oil-lubricated speed oil | 1200 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 548 mm |
|---|---|
| Abutment dimension da da | 354 mm |
| Minimum chamfer r12 r12 | 5.0 mm |
| Factor f0 f0 | 15 |
| Maximum fillet ra ra | 4 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6264?
The 6264 catalogue lists da = 354 mm; Da = 548 mm; ra ≤ 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6264?
The listed values for 6264 are grease: 950 rpm; oil: 1200 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6264?
The catalogue reference mass for 6264 is 110 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.