Deep groove ball bearings
6352 Deep Groove Ball Bearing Dimensions & Specifications
6352 deep groove ball bearing: 260 mm bore (d), 540 mm outside diameter (D), 102 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 260 mm |
|---|---|
| Outside diameter D | 540 mm |
| Width B | 102 mm |
| Mass | 118 kg |
| Catalogue dynamic load Cr | 505 kN |
| Catalogue static load Cor | 710 kN |
| Grease-lubricated speed grease | 1000 rpm |
| Oil-lubricated speed oil | 1300 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 503 mm |
|---|---|
| Abutment dimension da da | 298 mm |
| Minimum chamfer r12 r12 | 6.0 mm |
| Factor f0 f0 | 15 |
| Maximum fillet ra ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6352?
The 6352 catalogue lists da = 298 mm; Da = 503 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6352?
The listed values for 6352 are grease: 1000 rpm; oil: 1300 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6352?
The catalogue reference mass for 6352 is 118 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.