Single-row cylindrical roller bearings
N2332M Cylindrical Roller Bearing Dimensions & Specifications
N2332M cylindrical roller bearing: 160 mm bore (d), 340 mm outside diameter (D), 114 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 160 mm |
|---|---|
| Outside diameter D | 340 mm |
| Width B | 114 mm |
| Mass | 51.6 kg |
| Catalogue dynamic load Cr | 1080 kN |
| Catalogue static load Cor | 1650 kN |
| Grease-lubricated speed grease | 1500 rpm |
| Oil-lubricated speed oil | 1800 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Db Db | 317 mm |
|---|---|
| Abutment dimension da da | 180 mm |
| Minimum chamfer r12 r12 | 4 mm |
| Minimum chamfer r34 r34 | 4 mm |
| Roller envelope diameter Ew Ew | 292 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for N2332M?
The N2332M catalogue lists da = 180 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for N2332M?
The listed values for N2332M are grease: 1500 rpm; oil: 1800 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of N2332M?
The catalogue reference mass for N2332M is 51.6 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.