Single-row cylindrical roller bearings
NJ10/560 Cylindrical Roller Bearing Dimensions & Specifications
NJ10/560 cylindrical roller bearing: 560 mm bore (d), 820 mm outside diameter (D), 115 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 560 mm |
|---|---|
| Outside diameter D | 820 mm |
| Width B | 115 mm |
| Mass | 210 kg |
| Catalogue dynamic load Cr | 2120 kN |
| Catalogue static load Cor | 3980 kN |
| Grease-lubricated speed grease | 630 rpm |
| Oil-lubricated speed oil | 750 rpm |
Mounting dimensions & additional parameters (7)
| Abutment dimension Da Da | 794 mm |
|---|---|
| Abutment dimension db db | 586 mm |
| Minimum chamfer r12 r12 | 6 mm |
| Minimum chamfer r34 r34 | 6 mm |
| Maximum fillet ra ra | 5 mm |
| Maximum fillet rb rb | 5 mm |
| Roller envelope diameter Fw Fw | 625 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NJ10/560?
The NJ10/560 catalogue lists Da = 794 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for NJ10/560?
The listed values for NJ10/560 are grease: 630 rpm; oil: 750 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of NJ10/560?
The catalogue reference mass for NJ10/560 is 210 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.