Single-row cylindrical roller bearings
NU1040M Cylindrical Roller Bearing Dimensions & Specifications
NU1040M cylindrical roller bearing: 200 mm bore (d), 310 mm outside diameter (D), 51 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 200 mm |
|---|---|
| Outside diameter D | 310 mm |
| Width B | 51 mm |
| Mass | 14.3 kg |
| Catalogue dynamic load Cr | 450 kN |
| Catalogue static load Cor | 720 kN |
| Grease-lubricated speed grease | 1900 rpm |
| Oil-lubricated speed oil | 2400 rpm |
Mounting dimensions & additional parameters (7)
| Abutment dimension Da Da | 293 mm |
|---|---|
| Abutment dimension db db | 216 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Minimum chamfer r34 r34 | 2.1 mm |
| Maximum fillet ra ra | 2 mm |
| Maximum fillet rb rb | 2 mm |
| Roller envelope diameter Fw Fw | 227 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NU1040M?
The NU1040M catalogue lists Da = 293 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for NU1040M?
The listed values for NU1040M are grease: 1900 rpm; oil: 2400 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of NU1040M?
The catalogue reference mass for NU1040M is 14.3 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.