Single-row cylindrical roller bearings
NU1096 Cylindrical Roller Bearing Dimensions & Specifications
NU1096 cylindrical roller bearing: 480 mm bore (d), 700 mm outside diameter (D), 100 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 480 mm |
|---|---|
| Outside diameter D | 700 mm |
| Width B | 100 mm |
| Mass | 125 kg |
| Catalogue dynamic load Cr | 1620 kN |
| Catalogue static load Cor | 2860 kN |
| Grease-lubricated speed grease | 400 rpm |
| Oil-lubricated speed oil | 480 rpm |
Mounting dimensions & additional parameters (7)
| Abutment dimension Da Da | 660 mm |
|---|---|
| Abutment dimension db db | 517 mm |
| Minimum chamfer r12 r12 | 6 mm |
| Minimum chamfer r34 r34 | 6 mm |
| Maximum fillet ra ra | 5 mm |
| Maximum fillet rb rb | 5 mm |
| Roller envelope diameter Fw Fw | 536 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NU1096?
The NU1096 catalogue lists Da = 660 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for NU1096?
The listed values for NU1096 are grease: 400 rpm; oil: 480 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of NU1096?
The catalogue reference mass for NU1096 is 125 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.