Single-row cylindrical roller bearings
NU2952M Cylindrical Roller Bearing Dimensions & Specifications
NU2952M cylindrical roller bearing: 260 mm bore (d), 360 mm outside diameter (D), 60 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 260 mm |
|---|---|
| Outside diameter D | 360 mm |
| Width B | 60 mm |
| Mass | 18.6 kg |
| Catalogue dynamic load Cr | 535 kN |
| Catalogue static load Cor | 995 kN |
| Grease-lubricated speed grease | 1900 rpm |
| Oil-lubricated speed oil | 2200 rpm |
Mounting dimensions & additional parameters (7)
| Abutment dimension Da Da | 342 mm |
|---|---|
| Abutment dimension db db | 277 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Minimum chamfer r34 r34 | 2.1 mm |
| Maximum fillet ra ra | 2 mm |
| Maximum fillet rb rb | 2 mm |
| Roller envelope diameter Fw Fw | 286 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NU2952M?
The NU2952M catalogue lists Da = 342 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for NU2952M?
The listed values for NU2952M are grease: 1900 rpm; oil: 2200 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of NU2952M?
The catalogue reference mass for NU2952M is 18.6 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.