Single-row cylindrical roller bearings
NU3140M Cylindrical Roller Bearing Dimensions & Specifications
NU3140M cylindrical roller bearing: 200 mm bore (d), 340 mm outside diameter (D), 112 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 200 mm |
|---|---|
| Outside diameter D | 340 mm |
| Width B | 112 mm |
| Mass | 41.4 kg |
| Catalogue dynamic load Cr | 1190 kN |
| Catalogue static load Cor | 1850 kN |
| Grease-lubricated speed grease | 1900 rpm |
| Oil-lubricated speed oil | 2400 rpm |
Mounting dimensions & additional parameters (7)
| Abutment dimension Da Da | 320 mm |
|---|---|
| Abutment dimension db db | 218 mm |
| Minimum chamfer r12 r12 | 3 mm |
| Minimum chamfer r34 r34 | 3 mm |
| Maximum fillet ra ra | 2.5 mm |
| Maximum fillet rb rb | 2.5 mm |
| Roller envelope diameter Fw Fw | 233 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NU3140M?
The NU3140M catalogue lists Da = 320 mm; ra ≤ 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for NU3140M?
The listed values for NU3140M are grease: 1900 rpm; oil: 2400 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of NU3140M?
The catalogue reference mass for NU3140M is 41.4 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.