Single-row cylindrical roller bearings
NU3880M Cylindrical Roller Bearing Dimensions & Specifications
NU3880M cylindrical roller bearing: 400 mm bore (d), 500 mm outside diameter (D), 75 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 400 mm |
|---|---|
| Outside diameter D | 500 mm |
| Width B | 75 mm |
| Mass | 34.2 kg |
| Catalogue dynamic load Cr | 785 kN |
| Catalogue static load Cor | 1900 kN |
| Grease-lubricated speed grease | 1000 rpm |
| Oil-lubricated speed oil | 1200 rpm |
Mounting dimensions & additional parameters (7)
| Abutment dimension Da Da | 479 mm |
|---|---|
| Abutment dimension db db | 420 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Minimum chamfer r34 r34 | 2.1 mm |
| Maximum fillet ra ra | 2 mm |
| Maximum fillet rb rb | 2 mm |
| Roller envelope diameter Fw Fw | 427 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NU3880M?
The NU3880M catalogue lists Da = 479 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for NU3880M?
The listed values for NU3880M are grease: 1000 rpm; oil: 1200 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of NU3880M?
The catalogue reference mass for NU3880M is 34.2 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.