Single-row cylindrical roller bearings
NUP260M Cylindrical Roller Bearing Dimensions & Specifications
NUP260M cylindrical roller bearing: 300 mm bore (d), 540 mm outside diameter (D), 85 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 300 mm |
|---|---|
| Outside diameter D | 540 mm |
| Width B | 85 mm |
| Mass | 90 kg |
| Catalogue dynamic load Cr | 1400 kN |
| Catalogue static load Cor | 2070 kN |
| Grease-lubricated speed grease | 1000 rpm |
| Oil-lubricated speed oil | 1300 rpm |
Mounting dimensions & additional parameters (7)
| Abutment dimension Da Da | 509 mm |
|---|---|
| Abutment dimension db db | 327 mm |
| Minimum chamfer r12 r12 | 5 mm |
| Minimum chamfer r34 r34 | 5 mm |
| Maximum fillet ra ra | 4 mm |
| Maximum fillet rb rb | 4 mm |
| Roller envelope diameter Fw Fw | 364 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NUP260M?
The NUP260M catalogue lists Da = 509 mm; ra ≤ 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for NUP260M?
The listed values for NUP260M are grease: 1000 rpm; oil: 1300 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of NUP260M?
The catalogue reference mass for NUP260M is 90 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.