Single-row cylindrical roller bearings
NUP29/530 Cylindrical Roller Bearing Dimensions & Specifications
NUP29/530 cylindrical roller bearing: 530 mm bore (d), 710 mm outside diameter (D), 106 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 530 mm |
|---|---|
| Outside diameter D | 710 mm |
| Width B | 106 mm |
| Mass | 125 kg |
| Catalogue dynamic load Cr | 2180 kN |
| Catalogue static load Cor | 4600 kN |
| Grease-lubricated speed grease | 700 rpm |
| Oil-lubricated speed oil | 850 rpm |
Mounting dimensions & additional parameters (7)
| Abutment dimension Da Da | 690 mm |
|---|---|
| Abutment dimension db db | 566 mm |
| Minimum chamfer r12 r12 | 5 mm |
| Minimum chamfer r34 r34 | 5 mm |
| Maximum fillet ra ra | 4 mm |
| Maximum fillet rb rb | 4 mm |
| Roller envelope diameter Fw Fw | 573 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NUP29/530?
The NUP29/530 catalogue lists Da = 690 mm; ra ≤ 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for NUP29/530?
The listed values for NUP29/530 are grease: 700 rpm; oil: 850 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of NUP29/530?
The catalogue reference mass for NUP29/530 is 125 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.