Deep groove ball bearings
16026M Deep Groove Ball Bearing Dimensions & Specifications
16026M deep groove ball bearing: 130 mm bore (d), 200 mm outside diameter (D), 22 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 130 mm |
|---|---|
| Outside diameter D | 200 mm |
| Width B | 22 mm |
| Mass | 2.32 kg |
| Catalogue dynamic load Cr | 76 kN |
| Catalogue static load Cor | 80 kN |
| Grease-lubricated speed grease | 3200 rpm |
| Oil-lubricated speed oil | 3800 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 193 mm |
|---|---|
| Abutment dimension da da | 136 mm |
| Minimum chamfer r12 r12 | 1.1 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 1 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 16026M?
The 16026M catalogue lists da = 136 mm; Da = 193 mm; ra ≤ 1 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 16026M?
The listed values for 16026M are grease: 3200 rpm; oil: 3800 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 16026M?
The catalogue reference mass for 16026M is 2.32 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.