Deep groove ball bearings
16030M Deep Groove Ball Bearing Dimensions & Specifications
16030M deep groove ball bearing: 150 mm bore (d), 225 mm outside diameter (D), 24 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 150 mm |
|---|---|
| Outside diameter D | 225 mm |
| Width B | 24 mm |
| Mass | 3.63 kg |
| Catalogue dynamic load Cr | 84 kN |
| Catalogue static load Cor | 98.5 kN |
| Grease-lubricated speed grease | 2600 rpm |
| Oil-lubricated speed oil | 3200 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 218 mm |
|---|---|
| Abutment dimension da da | 156 mm |
| Minimum chamfer r12 r12 | 1.1 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 1 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 16030M?
The 16030M catalogue lists da = 156 mm; Da = 218 mm; ra ≤ 1 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 16030M?
The listed values for 16030M are grease: 2600 rpm; oil: 3200 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 16030M?
The catalogue reference mass for 16030M is 3.63 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.