Spherical roller bearings
22224CA/W33 Spherical Roller Bearing Dimensions & Specifications
22224CA/W33 spherical roller bearing: 120 mm bore (d), 215 mm outside diameter (D), 58 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 120 mm |
|---|---|
| Outside diameter D | 215 mm |
| Width B | 58 mm |
| Mass | 8.8 kg |
| Catalogue dynamic load Cr | 550 kN |
| Catalogue static load Cor | 765 kN |
| Grease-lubricated speed grease | 2000 rpm |
| Oil-lubricated speed oil | 2600 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 203 mm |
|---|---|
| Abutment dimension da da | 132 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Factor Y0 Y0 | 2.6 |
| Factor Y1 Y1 | 2.7 |
| Factor Y2 Y2 | 3.9 |
| Factor e e | 0.25 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 22224CA/W33?
The 22224CA/W33 catalogue lists da = 132 mm; Da = 203 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 22224CA/W33?
The listed values for 22224CA/W33 are grease: 2000 rpm; oil: 2600 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 22224CA/W33?
The catalogue reference mass for 22224CA/W33 is 8.8 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.