Spherical roller bearings
22230CA/W33 Spherical Roller Bearing Dimensions & Specifications
22230CA/W33 spherical roller bearing: 150 mm bore (d), 270 mm outside diameter (D), 73 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 150 mm |
|---|---|
| Outside diameter D | 270 mm |
| Width B | 73 mm |
| Mass | 18.4 kg |
| Catalogue dynamic load Cr | 765 kN |
| Catalogue static load Cor | 1120 kN |
| Grease-lubricated speed grease | 1300 rpm |
| Oil-lubricated speed oil | 1600 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 256 mm |
|---|---|
| Abutment dimension da da | 164 mm |
| Minimum chamfer r12 r12 | 3 mm |
| Factor Y0 Y0 | 2.5 |
| Factor Y1 Y1 | 2.6 |
| Factor Y2 Y2 | 3.9 |
| Factor e e | 0.26 |
| Maximum fillet ra ra | 2.5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 22230CA/W33?
The 22230CA/W33 catalogue lists da = 164 mm; Da = 256 mm; ra ≤ 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 22230CA/W33?
The listed values for 22230CA/W33 are grease: 1300 rpm; oil: 1600 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 22230CA/W33?
The catalogue reference mass for 22230CA/W33 is 18.4 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.