Spherical roller bearings
23052CA/W33 Spherical Roller Bearing Dimensions & Specifications
23052CA/W33 spherical roller bearing: 260 mm bore (d), 400 mm outside diameter (D), 104 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 260 mm |
|---|---|
| Outside diameter D | 400 mm |
| Width B | 104 mm |
| Mass | 46.6 kg |
| Catalogue dynamic load Cr | 1430 kN |
| Catalogue static load Cor | 2580 kN |
| Grease-lubricated speed grease | 800 rpm |
| Oil-lubricated speed oil | 950 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 382 mm |
|---|---|
| Abutment dimension da da | 278 mm |
| Minimum chamfer r12 r12 | 4 mm |
| Factor Y0 Y0 | 2.7 |
| Factor Y1 Y1 | 2.7 |
| Factor Y2 Y2 | 4.1 |
| Factor e e | 0.25 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23052CA/W33?
The 23052CA/W33 catalogue lists da = 278 mm; Da = 382 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23052CA/W33?
The listed values for 23052CA/W33 are grease: 800 rpm; oil: 950 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23052CA/W33?
The catalogue reference mass for 23052CA/W33 is 46.6 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.