Spherical roller bearings
23064CA/W33 Spherical Roller Bearing Dimensions & Specifications
23064CA/W33 spherical roller bearing: 320 mm bore (d), 480 mm outside diameter (D), 121 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 320 mm |
|---|---|
| Outside diameter D | 480 mm |
| Width B | 121 mm |
| Mass | 75.6 kg |
| Catalogue dynamic load Cr | 1960 kN |
| Catalogue static load Cor | 3850 kN |
| Grease-lubricated speed grease | 630 rpm |
| Oil-lubricated speed oil | 800 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 462 mm |
|---|---|
| Abutment dimension da da | 338 mm |
| Minimum chamfer r12 r12 | 4 mm |
| Factor Y0 Y0 | 2.8 |
| Factor Y1 Y1 | 2.8 |
| Factor Y2 Y2 | 4.2 |
| Factor e e | 0.24 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23064CA/W33?
The 23064CA/W33 catalogue lists da = 338 mm; Da = 462 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23064CA/W33?
The listed values for 23064CA/W33 are grease: 630 rpm; oil: 800 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23064CA/W33?
The catalogue reference mass for 23064CA/W33 is 75.6 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.