Spherical roller bearings
23172CA/W33 Spherical Roller Bearing Dimensions & Specifications
23172CA/W33 spherical roller bearing: 360 mm bore (d), 600 mm outside diameter (D), 192 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 360 mm |
|---|---|
| Outside diameter D | 600 mm |
| Width B | 192 mm |
| Mass | 217 kg |
| Catalogue dynamic load Cr | 3800 kN |
| Catalogue static load Cor | 7100 kN |
| Grease-lubricated speed grease | 400 rpm |
| Oil-lubricated speed oil | 530 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 578 mm |
|---|---|
| Abutment dimension da da | 382 mm |
| Minimum chamfer r12 r12 | 5 mm |
| Factor Y0 Y0 | 2.1 |
| Factor Y1 Y1 | 2.2 |
| Factor Y2 Y2 | 3.2 |
| Factor e e | 0.31 |
| Maximum fillet ra ra | 4 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23172CA/W33?
The 23172CA/W33 catalogue lists da = 382 mm; Da = 578 mm; ra ≤ 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23172CA/W33?
The listed values for 23172CA/W33 are grease: 400 rpm; oil: 530 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23172CA/W33?
The catalogue reference mass for 23172CA/W33 is 217 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.