Spherical roller bearings
23176CA/W33 Spherical Roller Bearing Dimensions & Specifications
23176CA/W33 spherical roller bearing: 380 mm bore (d), 620 mm outside diameter (D), 194 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 380 mm |
|---|---|
| Outside diameter D | 620 mm |
| Width B | 194 mm |
| Mass | 229 kg |
| Catalogue dynamic load Cr | 4000 kN |
| Catalogue static load Cor | 7600 kN |
| Grease-lubricated speed grease | 400 rpm |
| Oil-lubricated speed oil | 500 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 598 mm |
|---|---|
| Abutment dimension da da | 402 mm |
| Minimum chamfer r12 r12 | 5 mm |
| Factor Y0 Y0 | 2.2 |
| Factor Y1 Y1 | 2.2 |
| Factor Y2 Y2 | 3.3 |
| Factor e e | 0.3 |
| Maximum fillet ra ra | 4 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23176CA/W33?
The 23176CA/W33 catalogue lists da = 402 mm; Da = 598 mm; ra ≤ 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23176CA/W33?
The listed values for 23176CA/W33 are grease: 400 rpm; oil: 500 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23176CA/W33?
The catalogue reference mass for 23176CA/W33 is 229 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.