Spherical roller bearings
23264CA/W33 Spherical Roller Bearing Dimensions & Specifications
23264CA/W33 spherical roller bearing: 320 mm bore (d), 580 mm outside diameter (D), 208 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 320 mm |
|---|---|
| Outside diameter D | 580 mm |
| Width B | 208 mm |
| Mass | 239 kg |
| Catalogue dynamic load Cr | 3900 kN |
| Catalogue static load Cor | 6900 kN |
| Grease-lubricated speed grease | 450 rpm |
| Oil-lubricated speed oil | 600 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 558 mm |
|---|---|
| Abutment dimension da da | 342 mm |
| Minimum chamfer r12 r12 | 5 mm |
| Factor Y0 Y0 | 1.8 |
| Factor Y1 Y1 | 1.9 |
| Factor Y2 Y2 | 2.8 |
| Factor e e | 0.36 |
| Maximum fillet ra ra | 4 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23264CA/W33?
The 23264CA/W33 catalogue lists da = 342 mm; Da = 558 mm; ra ≤ 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23264CA/W33?
The listed values for 23264CA/W33 are grease: 450 rpm; oil: 600 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23264CA/W33?
The catalogue reference mass for 23264CA/W33 is 239 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.