Spherical roller bearings
23272CA/W33 Spherical Roller Bearing Dimensions & Specifications
23272CA/W33 spherical roller bearing: 360 mm bore (d), 650 mm outside diameter (D), 232 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 360 mm |
|---|---|
| Outside diameter D | 650 mm |
| Width B | 232 mm |
| Mass | 342 kg |
| Catalogue dynamic load Cr | 4800 kN |
| Catalogue static load Cor | 8550 kN |
| Grease-lubricated speed grease | 380 rpm |
| Oil-lubricated speed oil | 500 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 622 mm |
|---|---|
| Abutment dimension da da | 388 mm |
| Minimum chamfer r12 r12 | 6 mm |
| Factor Y0 Y0 | 1.8 |
| Factor Y1 Y1 | 1.9 |
| Factor Y2 Y2 | 2.8 |
| Factor e e | 0.36 |
| Maximum fillet ra ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23272CA/W33?
The 23272CA/W33 catalogue lists da = 388 mm; Da = 622 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23272CA/W33?
The listed values for 23272CA/W33 are grease: 380 rpm; oil: 500 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23272CA/W33?
The catalogue reference mass for 23272CA/W33 is 342 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.