Spherical roller bearings
23996CAF3/W33 Spherical Roller Bearing Dimensions & Specifications
23996CAF3/W33 spherical roller bearing: 480 mm bore (d), 650 mm outside diameter (D), 128 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 480 mm |
|---|---|
| Outside diameter D | 650 mm |
| Width B | 128 mm |
| Mass | 121 kg |
| Catalogue dynamic load Cr | 2580 kN |
| Catalogue static load Cor | 5850 kN |
| Grease-lubricated speed grease | 400 rpm |
| Oil-lubricated speed oil | 500 rpm |
Mounting dimensions & additional parameters (7)
| Abutment dimension Da Da | 628 mm |
|---|---|
| Abutment dimension da da | 502 mm |
| Minimum chamfer r12 r12 | 5 mm |
| Factor Y0 Y0 | 3.7 |
| Factor Y2 Y2 | 5.7 |
| Factor e e | 0.18 |
| Maximum fillet ra ra | 4 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23996CAF3/W33?
The 23996CAF3/W33 catalogue lists da = 502 mm; Da = 628 mm; ra ≤ 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23996CAF3/W33?
The listed values for 23996CAF3/W33 are grease: 400 rpm; oil: 500 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23996CAF3/W33?
The catalogue reference mass for 23996CAF3/W33 is 121 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.