Spherical roller bearings
23988CAF3/W33 Spherical Roller Bearing Dimensions & Specifications
23988CAF3/W33 spherical roller bearing: 440 mm bore (d), 600 mm outside diameter (D), 118 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 440 mm |
|---|---|
| Outside diameter D | 600 mm |
| Width B | 118 mm |
| Mass | 96.3 kg |
| Catalogue dynamic load Cr | 2190 kN |
| Catalogue static load Cor | 4800 kN |
| Grease-lubricated speed grease | 450 rpm |
| Oil-lubricated speed oil | 560 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 582 mm |
|---|---|
| Abutment dimension da da | 458 mm |
| Minimum chamfer r12 r12 | 4 mm |
| Factor Y0 Y0 | 3.8 |
| Factor Y1 Y1 | 3.9 |
| Factor Y2 Y2 | 5.7 |
| Factor e e | 0.18 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23988CAF3/W33?
The 23988CAF3/W33 catalogue lists da = 458 mm; Da = 582 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23988CAF3/W33?
The listed values for 23988CAF3/W33 are grease: 450 rpm; oil: 560 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23988CAF3/W33?
The catalogue reference mass for 23988CAF3/W33 is 96.3 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.