Spherical roller bearings
248/800CAF3/W33 Spherical Roller Bearing Dimensions & Specifications
248/800CAF3/W33 spherical roller bearing: 800 mm bore (d), 980 mm outside diameter (D), 180 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 800 mm |
|---|---|
| Outside diameter D | 980 mm |
| Width B | 180 mm |
| Mass | 300 kg |
| Catalogue dynamic load Cr | 3933 kN |
| Catalogue static load Cor | 12255 kN |
| Grease-lubricated speed grease | 180 rpm |
| Oil-lubricated speed oil | 240 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 958 mm |
|---|---|
| Abutment dimension da da | 822 mm |
| Minimum chamfer r12 r12 | 5 mm |
| Factor Y0 Y0 | 4.5 |
| Factor Y1 Y1 | 4.5 |
| Factor Y2 Y2 | 6.7 |
| Factor e e | 0.15 |
| Maximum fillet ra ra | 4 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 248/800CAF3/W33?
The 248/800CAF3/W33 catalogue lists da = 822 mm; Da = 958 mm; ra ≤ 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 248/800CAF3/W33?
The listed values for 248/800CAF3/W33 are grease: 180 rpm; oil: 240 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 248/800CAF3/W33?
The catalogue reference mass for 248/800CAF3/W33 is 300 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.