Spherical roller bearings
24880CA/W33 Spherical Roller Bearing Dimensions & Specifications
24880CA/W33 spherical roller bearing: 400 mm bore (d), 500 mm outside diameter (D), 100 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 400 mm |
|---|---|
| Outside diameter D | 500 mm |
| Width B | 100 mm |
| Mass | 45.3 kg |
| Catalogue dynamic load Cr | 1330 kN |
| Catalogue static load Cor | 3500 kN |
| Grease-lubricated speed grease | 600 rpm |
| Oil-lubricated speed oil | 800 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 488 mm |
|---|---|
| Abutment dimension da da | 412 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Factor Y0 Y0 | 3.67 |
| Factor Y1 Y1 | 3.76 |
| Factor Y2 Y2 | 5.59 |
| Factor e e | 0.18 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 24880CA/W33?
The 24880CA/W33 catalogue lists da = 412 mm; Da = 488 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 24880CA/W33?
The listed values for 24880CA/W33 are grease: 600 rpm; oil: 800 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 24880CA/W33?
The catalogue reference mass for 24880CA/W33 is 45.3 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.