Spherical roller bearings
249/600CAF3/W33 Spherical Roller Bearing Dimensions & Specifications
249/600CAF3/W33 spherical roller bearing: 600 mm bore (d), 800 mm outside diameter (D), 200 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 600 mm |
|---|---|
| Outside diameter D | 800 mm |
| Width B | 200 mm |
| Mass | 292 kg |
| Catalogue dynamic load Cr | 4500 kN |
| Catalogue static load Cor | 11400 kN |
| Grease-lubricated speed grease | 320 rpm |
| Oil-lubricated speed oil | 380 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 778 mm |
|---|---|
| Abutment dimension da da | 622 mm |
| Minimum chamfer r12 r12 | 5 mm |
| Factor Y0 Y0 | 2.9 |
| Factor Y1 Y1 | 2.9 |
| Factor Y2 Y2 | 4.4 |
| Factor e e | 0.23 |
| Maximum fillet ra ra | 4 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 249/600CAF3/W33?
The 249/600CAF3/W33 catalogue lists da = 622 mm; Da = 778 mm; ra ≤ 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 249/600CAF3/W33?
The listed values for 249/600CAF3/W33 are grease: 320 rpm; oil: 380 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 249/600CAF3/W33?
The catalogue reference mass for 249/600CAF3/W33 is 292 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.